Menu
Your Cart

QSC Active Line Array KLA181

QSC Active Line Array KLA181
QSC Active Line Array KLA181
QSC Active Line Array KLA181
QSC Active Line Array KLA181
QSC Active Line Array KLA181
QSC Active Line Array KLA181
QSC Active Line Array KLA181
QSC Active Line Array KLA181
QSC Active Line Array KLA181
QSC Active Line Array KLA181
QSC Active Line Array KLA181
  • Stock: In Stock
  • Brand: QSC Audio
  • Model: KLA181
  • Weight: 54.40kg
  • Dimensions: 610.00mm x 710.00mm x 760.00mm
Products Sold: 0
Product Views: 3351
RM0.00
Ex Tax: RM0.00
Whatsapp Enquiry

In addition to DEEP™ DSP algorithm, GuardRail™, Auto Standby, balanced line-level XLR input with an XLR "Thru" connector, Attenuation Control and LED indicators, the KLA181 subwoofer also includes a polarity switch to optimize summation between subwoofer and top-boxes.

Two KLA12 Loudspeakers over the KLA181 Subwoofer


Features

  • 1,000 watt power module
  • 18-inch vented subwoofer
  • High acoustic output (135 dB SPL peak)
  • Frequency range down to 33 Hz (-10 dB)
  • Extensive DSP further enhances and protects performance
  • powerCON® Input and Thru connections
  • Threaded pole receptacle for free-standing applications (black models only)
  • Suspension made possible via M10 fittings or KLA12AF Array Frame
  • Integrated threaded pole mount supports up to two KLA12 enclosures (black models only)
SPECIFICATIONSKLA181
Configuration18-inch subwoofer
Transducers
High Frequency
Low Frequency


18-inch cone transducer
Frequency Response (-6 dB)38 Hz
Frequency Range (-10 dB)33 Hz
Nominal Coverage-
Maximum SPL (1 meter)135 dB peak
Amplifiers
Power Output1000 W Class D continuous
Input ImpedanceXLR: 40 kΩ balanced / 20 kΩ unbalanced
ControlsPower, Attenuation, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (Pwr/Limit/Off)
IndicatorsPower, Signal, Standby, Limit
ConnectorsBalanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
CoolingOn demand, 50 mm variable speed fan
Amplifier ProtectionThermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer ProtectionThermal limiting, excursion limiting
AC Power InputUniversal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption
(1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
MaterialPainted birch plywood
FinishBlack or white textured paint
GrilleBlack or white powder coated 16 gauge steel
Dimensions (HWD) inches30 x 28 x 24
Dimensions (HWD) mm760 x 710 x 610
Net Weight119.9 lbs (54.4 kg)

All specifications are subject to change without notice.

PowerCON is a trademark of Neutrik. All other trademarks are QSC LLC.

Write a review

Note: HTML is not translated!
Bad Good