Hot

QSC Power Amplifier GX3

Stock: In Stock
Brand: QSC Audio
Model: GX3
Weight: 12.10kg
Dimensions: 153.00mm x 380.00mm x 610.00mm

Products Sold: 2

Product Views: 4251

Based on 0 reviews. - Write a review

RM3,330.00

Ex Tax: RM3,330.00

Whatsapp Enquiry

Qty

Add to Cart

Buy Now

Add to Wish List Compare this Product

Description
Reviews

Power levels matched to the most popular speakers. Inputs: XLR, 1/4" TRS and phono. Outputs: Speakon® combo and binding posts.

Features

Power levels matched to the most popular speakers used by entertainers
Optimized for maximum real-world headroom into 4- and 8-ohm speaker systems
Inputs: XLR, 1/4-inch TRS and phono input connectors for compatibility with any source
Outputs: Speakon® combo accepts 1/4-inch (TS) plugs or Speakon 2- and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
Minimum depth chassis (10.1-inch / 257 mm) fits in compact, inexpensive effects racks
Lightweight - GX3 and GX5 less than 26 lb (12.5 kg). GX7 only 15.5 lb (7 kg)*
Detented gain controls for precise setting and matching of sensitivity
GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
Front panel LEDs monitor power, signal, and clipping
Subwoofer/satellite crossover built-in

* 230V 16.5 lb (7.5 kg)

SPECIFICATIONS	GX3		GX5		GX7
	Output power per channel
8 ohms / 1 kHz (both channels driven)	300 W		500 W		725 W
8 ohms / 1 kHz (single channel driven)	350 W		600 W		800 W
4 ohms / 1 kHz (both channels driven)	425 W		700 W		1000 W
4 ohms / 1 kHz (single channel driven)	500 W		850 W		1200 W
Distortion (1 dB below rated power, 1 kHz)	8 ohms: less than 0.02% 4 ohms: less than 0.05%
Signal to Noise (20 Hz - 20 kHz)	100 dB
Input Sensitivity	1.2 V rms
Voltage Gain	32.2 dB		34.4 dB		36.1 dB
Output Circuitry	Class B		2-tier Class H		2-tier Class H
Power Requirements (1/8 power, pink noise at 4 ohms, 120V)	6.3 A		6 A		10.1 A
Frequency Response	20 Hz–20 kHz, +0, -1 dB
Dynamic Headroom (4 ohms)	2 dB
Input Impedance	Greater than 20 kΩ (balanced)
Maximum Input Level	+24 dBu (16 V rms)
Input Connectors (each channel)	3-pin XLR and 1/4-inch TRS, balanced, parallel Phono, unbalanced
Output Connectors (each channel)	Speakon®, 1/4-inch, Binding posts
Amplifier and Load Protection	Short circuit, open circuit, thermal, RF protection Load protected against DC faults
Front Panel Controls and Indicators	Gain controls, 21 detents Red CLIP LEDs, proportional, 0.1% THD threshold Green SIGNAL LEDs, threshold 35 dB below clipping Blue POWER LED, AC on
Rear Panel Controls	Full Range / Crossover switch 100 Hz, 3rd order LP (sub), 2nd order HP (top)
Product Dimensions (H×W×D)	89 × 483 × 257 mm 3.5 × 19 × 10.1 in
Carton Dimensions (H×W×D)	610 × 380 × 153 mm 24 × 15 × 6 in
Net Weight	12.1 kg / 27 lb		12.6 kg / 28 lb		120V model: 7 kg / 15.5 lb 230V model: 7.5 kg / 16.5 lb
Shipping Weight	13.2 kg / 29.1 lb		14.5 kg / 32 lb		120V model: 9.3 kg / 20.5 lb 230V model: 9.75 kg / 21.5 lb
Agency Approvals	UL, CE, RoHS/WEEE Compliant
AC Current and Heating, 120 VAC (multiply current by 0.5 for 230 VAC)	GX3		GX5		GX7
Operating Condition	AC amps	BTU/hour	AC amps	BTU/hour	AC amps	BTU/hour
Idle	0.2	44	0.3	60	0.6	82
8 + 8 ohms, 1/8 power 1	4.1	904	3.3	734	6.7	1169
8 + 8 ohms, 1/3 power 2	6.1	1160	8.5	1456	13.3	1807
8 + 8 ohms, full power 3	9.75	1109	16.2	1891	26.5	2167
4 + 4 ohms, 1/8 power 1	6.3	1515	5.8	1160	10.1	1963
4 + 4 ohms, 1/3 power 2	9.4	2105	11.2	2162	18.5	2612
4 + 4 ohms, full power 3	15.0	2297	24.5	3754	40	4478

1 1/8 power represents typical maximum operating conditions
2 1/3 power represents over-driven program levels
3 Full power is breaker limited to short periods
For 230 V, multiply AC current by 0.5
For 100 V, multiply AC current by 1.25

All specifications are subject to change without notice.

QSC Power Amplifier GX3

Features

Write a review

You may also like

By the same brand

About Us

My Account

Customer Service