Features

• 12-inch Woofer; 1.75-inch diaphragm compression driver
• 75° conical DMT coverage
• Maximum SPL 131 dB peak
• Also functions as monitor floor wedge
• 1000-watt Class D power modules in all models (2 × 500 W continuous)
• Onboard mixer with two combo XLR and ¼⁻ᶦⁿᶜʰ inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output

PECIFICATIONS	KW122
Configuration	12-inch 2-way multipurpose
Transducers Low-frequency Mid-frequency High-frequency	12-inch cone transducer - 1.75-inch diaphragm compression driver
Frequency Response (-6 dB)	53 Hz to 18 kHz
Frequency Range (-10 dB)	50 Hz to 20 kHz
Nominal Coverage (-6 dB)	75° axisymmetric
Maximum SPL1	131 dB peak
Amplifier
Power Output2	1000 W Class D (500 W LF + 500 W HF) continuous 2000 W peak
Input Impedance	Channel A XLR / ¼⁻ᶦⁿᶜʰ:  Mic gain setting Balanced Unbalanced 0 dB 38 kΩ 19 kΩ +12 dB 10 kΩ 5 kΩ +24 dB 2.66 kΩ 1.33 kΩ +36 dB 660Ω 330Ω Channel B XLR / ¼⁻ᶦⁿᶜʰ: 38 kΩ balanced / 19 kΩ unbalanced Channel B RCA: 10 kΩ
Controls	Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators	Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)
Connectors	Balanced female XLR/¼⁻ᶦⁿᶜʰ line/mic level input, Balanced female XLR/¼⁻ᶦⁿᶜʰ line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling	On demand, 50 mm variable speed fan
Amplifier Protection	Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection	Thermal limiting, excursion limiting
AC Power Input	Universal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption (1/8 Power)	100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A
Enclosure
Material	15 mm painted birch plywood
Finish	Black textured paint
Grille	Black powder coated 16 gauge steel
Speaker Dimensions (H×W×D)	660 × 381 × 391 mm 26 × 15 × 15.4 in
Carton Dimensions (H×W×D)	710 × 530 × 508 mm 28 × 20.9 × 20 in
Net Weight	22.2 kg / 49 lb
Shipping Weight	29 kg / 63.9 lb
Available Accessories	KW122 suspension kit, KW122 cover, KW M10 kit

All specifications are subject to change without notice.

• Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance
• DMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound field
• Rugged, texture-painted birch enclosures
• Four-position Mic/Line gain (full-range models)
• Tour-grade 16 gauge steel grilles
• Comfortable ergonomic handles
• 35 mm pole sockets with Tilt-Direct™
• M10 rigging points for suspended installation